Industrial Machinery Stocks

Eaton Corporation plc operates as a power management company worldwide. The company's Electrical Americas and Electrical Global segment provides electrical components, industrial components, power distribution and assemblies, residential products, single and three phase power quality and connectivity products, wiring devices, circuit protection products, utility power distribution products, power reliability equipment, and services, as well as hazardous duty electrical equipment, emergency lighting, fire detection, explosion-proof instrumentation, and structural support systems. Its Aerospace segment offers pumps, motors, hydraulic power units, hoses and fittings, and electro-hydraulic pumps; valves, cylinders, electronic controls, electromechanical actuators, sensors, aircraft flap and slat systems, and nose wheel steering systems; hose, thermoplastic tubing products, fittings, adapters, couplings, and sealing and ducting products; air-to-air refueling systems, fuel pumps, fuel inerting products, sensors, valves, and adapters and regulators; oxygen generation system, payload carriages, and thermal management products; and wiring connectors and cables, as well as hydraulic and bag filters, strainers and cartridges, and golf grips for manufacturers of commercial and military aircraft, and related after-market customers, as well as industrial applications. The company's Vehicle segment offers transmissions, clutches, hybrid power systems, superchargers, engine valves and valve actuation systems, locking and limited slip differentials, transmission controls, and fuel vapor components for the vehicle industry. Its eMobility segment provides voltage inverters, converters, fuses, onboard chargers, circuit protection units, vehicle controls, power distribution systems, fuel tank isolation valves, and commercial vehicle hybrid systems. Eaton Corporation plc was founded in 1911 and is based in Dublin, Ireland.

Parker-Hannifin Corporation manufactures and sells motion and control technologies and systems for various mobile, industrial, and aerospace markets worldwide. The company operates through two segments, Diversified Industrial and Aerospace Systems. The Company's Diversified Industrial segment offers sealing, shielding, thermal products and systems, adhesives, coatings, and noise vibration and harshness solutions; filters, systems, and diagnostics solutions to monitor and remove contaminants from fuel, air, oil, water, and other liquids and gases; connectors, which control, transmit, and contain fluid; control solutions for extreme corrosion resistance, temperatures, pressures, and precise flow; and hydraulic, pneumatic, and electromechanical components and systems for builders and users of mobile and industrial machinery and equipment. This segment sells its products to original equipment manufacturers (OEMs) and distributors who serve the replacement markets in manufacturing, packaging, processing, transportation, construction, refrigeration and air conditioning, agricultural, and military machinery and equipment industries. Its Aerospace Systems segment offers products for use in commercial and military airframe and engine programs, such as control actuation systems and components, engine build-up ducting, engine exhaust nozzles and assemblies, engine systems and components, fluid conveyance systems and components, fuel systems and components, fuel tank inerting systems, hydraulic systems and components, lubrication components, pilot controls, pneumatic control components, thermal management products, and wheels and brakes, as well as fluid metering, delivery, and atomization devices. This segment markets its products directly to OEMs and end users. It markets its products through direct-sales employees, independent distributors, and sales representatives. The company was founded in 1917 and is headquartered in Cleveland, Ohio.

Illinois Tool Works Inc. manufactures and sells industrial products and equipment worldwide. It operates through seven segments: Automotive OEM; Food Equipment; Test & Measurement and Electronics; Welding; Polymers & Fluids; Construction Products; and Specialty Products. The Automotive OEM segment offers plastic and metal components, fasteners, and assemblies for automobiles, light trucks, and other industrial uses. The Food Equipment segment provides warewashing, refrigeration, cooking, and food processing equipment; kitchen exhaust, ventilation, and pollution control systems; and food equipment maintenance and repair services. The Test & Measurement and Electronics segment produces and sells equipment, consumables, and related software for testing and measuring of materials and structures, as well as equipment and consumables used in the production of electronic subassemblies and microelectronics. The Welding segment produces arc welding equipment; and metal arc welding consumables and related accessories. The Polymers & Fluids segment produces adhesives, sealants, lubrication and cutting fluids, and fluids and polymers for auto aftermarket maintenance and appearance. The Construction Products segment offers engineered fastening systems and solutions for the residential construction, renovation/remodel, and commercial construction markets. The Specialty Products segment offers beverage packaging equipment and consumables, product coding and marking equipment and consumables, and appliance components and fasteners. It serves the automotive OEM/tiers, commercial food equipment, construction, general industrial, and automotive aftermarket end markets. The company distributes its products directly to industrial manufacturers, as well as through independent distributors. Illinois Tool Works Inc. was founded in 1912 and is based in Glenview, Illinois.

Emerson Electric Co., a technology and engineering company, provides various solutions for customers in industrial, commercial, and residential markets in the Americas, Asia, the Middle East, Africa, and Europe. The company operates through Automation Solutions, and Commercial & Residential Solutions segments. The Automation Solutions segment offers measurement and analytical instrumentation, industrial valves and equipment, and process control software and systems. It serves oil and gas, refining, chemicals, power generation, life sciences, food and beverage, automotive, pulp and paper, metals and mining, and municipal water supplies markets. The Commercial & Residential Solutions segment offers residential and commercial heating and air conditioning products, such as reciprocating and scroll compressors; system protector and flow control devices; standard, programmable, and Wi-Fi thermostats; monitoring equipment and electronic controls for gas and electric heating systems; gas valves for furnaces and water heaters; ignition systems for furnaces; sensors and thermistors for home appliances; and temperature sensors and controls. It also provides reciprocating, scroll, and screw compressors; precision flow controls; system diagnostics and controls; and environmental control systems. In addition, this segment offers air conditioning, refrigeration, and lighting control technologies, as well as facility design and product management, site commissioning, facility monitoring, and energy modeling services; tools for professionals and homeowners; and appliance solutions. Emerson Electric Co. was incorporated in 1890 and is headquartered in Saint Louis, Missouri.

Roper Technologies, Inc. designs and develops software, and engineered products and solutions. The company offers management, campus solutions, diagnostic and laboratory information management, enterprise management, information solutions, transportation management, financial and compliance management, and cloud-based financial analytics and performance management software; cloud-based software to the property and casualty insurance industry; and software, services, and technologies for foodservice operations. It also provides cloud-based data, collaboration, and estimating automation software; electronic marketplace; visual effects and 3D content software; wireless sensor network and solutions; cloud-based software for the life insurance and financial services industries; supply chain software; health care service and software; RFID card readers; data analytics and information; and pharmacy software solutions. In addition, the company offers precision rubber and polymer testing instruments, and data analysis software; ultrasound accessories; testing and analyzing plastic solutions; dispensers and metering pumps; control valves; precision weighing equipment; automated surgical scrub and linen dispensing equipment; water meters; optical and electromagnetic measurement systems; automated leak detection equipment; medical devices; products and services for water and gas utilities; and equipment and consumables. It also provides temperature control and emergency shutoff valves; turbomachinery control hardware, software, and services; specialized pumps; flow meter calibrators and controllers; vibration monitoring systems and controls; analytical instrument; drilling power section; and pressure and level sensors. The company was formerly known as Roper Industries, Inc. and changed its name to Roper Technologies, Inc. in April 2015. The company was incorporated in 1981 and is based in Sarasota, Florida.

Cummins Inc. designs, manufactures, distributes, and services diesel and natural gas engines, electric and hybrid powertrains, and related components worldwide. It operates through five segments: Engine, Distribution, Components, Power Systems, and New Power. The company offers diesel and natural gas-powered engines under the Cummins and other customer brands for the heavy and medium-duty truck, bus, recreational vehicle, light-duty automotive, construction, mining, marine, rail, oil and gas, defense, and agricultural markets; and offers new parts and services, as well as remanufactured parts and engines. It also provides power generation systems, high-horsepower engines, heavy and medium duty engines, application engineering services, custom-designed assemblies, retail and wholesale aftermarket parts, and in-shop and field-based repair services. In addition, the company offers emission solutions; turbochargers; air and fuel filters, fuel water separators, lube and hydraulic filters, coolants, fuel additives, and other filtration systems; and electronic control modules, sensors, and supporting software, as well as new, replacement, and remanufactured fuel systems. Further, it provides automated transmissions; standby and prime power generators, controls, paralleling systems, and transfer switches, as well as A/C generator/alternator products under the Stamford and AVK brands; and electrified power systems with components and subsystems, including battery, fuel cell, and hydrogen production technologies. Additionally, it offers filtration, aftertreatment, controls systems, air handling systems, automated transmissions, electric power generation systems, and batteries. The company sells its products to original equipment manufacturers, distributors, dealers, and other customers. The company was formerly known as Cummins Engine Company and changed its name to Cummins Inc. in 2001. Cummins Inc. was founded in 1919 and is headquartered in Columbus, Indiana.

Howmet Aerospace Inc. provides advanced engineered solutions for the aerospace and transportation industries in the United States, Japan, France, Germany, the United Kingdom, Mexico, Italy, Canada, Poland, China, and internationally. It operates through four segments: Engine Products, Fastening Systems, Engineered Structures, and Forged Wheels. The Engine Products segment offers airfoils and seamless rolled rings primarily for aircraft engines and industrial gas turbines; and rotating parts, as well as structural parts. The Fastening Systems segment produces aerospace fastening systems, as well as commercial transportation, industrial, and other fasteners. The Engineered Structures segment provides titanium ingots and mill products for aerospace and defense applications; and aluminum and nickel forgings, and machined components and assemblies. The Forged Wheels segment offers forged aluminum wheels and related products for heavy-duty trucks and commercial transportation markets. The company was formerly known as Arconic Inc. The company was founded in 1888 and is based in Pittsburgh, Pennsylvania.

AMETEK, Inc. manufactures and sells electronic instruments and electromechanical devices worldwide. It operates in two segments, Electronic Instruments (EIG) and Electromechanical (EMG). The company's EIG segment offers advanced instruments for the process, aerospace, power, and industrial markets; process and analytical instruments for the oil and gas, petrochemical, pharmaceutical, semiconductor, automation, and food and beverage industries; and instruments to the laboratory equipment, ultra-precision manufacturing, medical, and test and measurement markets. This segment also provides power quality monitoring and metering devices, uninterruptible power supplies, programmable power equipment, electromagnetic compatibility test equipment, gas turbines, and environmental health and safety market sensors, dashboard instruments for heavy trucks and other vehicles, and instrumentation and controls for the food and beverage industries; and aircraft and engine sensors, monitoring systems, power supplies, fuel and fluid measurement systems, and data acquisition systems for the aerospace industry. Its EMG segment offers engineered electrical connectors and electronics packaging to protect sensitive devices and mission-critical electronics; precision motion control products for data storage, medical devices, business equipment, automation, and other applications; high-purity powdered metals, strips and foils, specialty clad metals, and metal matrix composites; motor-blower systems and heat exchangers for use in thermal management, military, commercial aircraft, and military ground vehicles; and motors for use in commercial appliances, fitness equipment, food and beverage machines, hydraulic pumps, and industrial blowers. This segment also operates a network of aviation maintenance, repair, and overhaul facilities. In addition, the company offers clinical and educational communication solutions. AMETEK, Inc. was founded in 1930 and is headquartered in Berwyn, Pennsylvania.

Ingersoll Rand Inc. provides various mission-critical air, fluid, energy, specialty vehicle and medical technologies in the United States, Europe, the Middle East, Africa, and the Asia Pacific. It operates through two segments, Industrial Technologies and Services, and Precision and Science Technologies. The Industrial Technologies and Services segment designs, manufactures, markets, and services various air and gas compression, vacuum, and blower products; fluid transfer equipment and loading systems; and power tools and lifting equipment, including associated aftermarket parts, consumables, air treatment equipment, controls, other accessories, and services. The Precision and Science Technologies segment designs, manufactures, and markets a range of specialized positive displacement pumps, fluid management systems, accessories and aftermarket parts for liquid and gas dosing, transfer, dispensing, compression, sampling, pressure management and flow control in specialized or critical applications. The company's products are used in medical, laboratory, industrial manufacturing, water and wastewater, chemical processing, precision irrigation, energy, food and beverage, agriculture, and vacuum and automated liquid handling end-markets, as well as various manufacturing and industrial facilities applications. It sells through an integrated network of direct sales representatives and independent distributors under the Ingersoll Rand, Gardner Denver, Club Car, CompAir, Nash, Elmo Rietschle, Robuschi, Thomas, Milton Roy, Seepex, ARO, Emco Wheaton, Runtech Systems, Air Dimensions, Albin, Dosatron, Haskel, LMI, Maximus, MP, Oberdorfer, Welch, Williams, Zinnser Analytic, and YZ brands. The company was formerly known as Gardner Denver Holdings, Inc. and changed its name to Ingersoll Rand Inc. in March 2020. Ingersoll Rand Inc. was founded in 1859 and is headquartered in Davidson, North Carolina.

Otis Worldwide Corporation manufactures, installs, and services elevators and escalators in the United States, China, and internationally. The company operates in two segments, New Equipment and Service. The New Equipment segment designs, manufactures, sells, and installs a range of passenger and freight elevators, as well as escalators and moving walkways for residential and commercial buildings, and infrastructure projects. The Service segment performs maintenance and repair services, as well as modernization services to upgrade elevators and escalators. It had a network of approximately 34,000 service mechanics operating approximately 1,400 branches and offices. The company was founded in 1853 and is headquartered in Farmington, Connecticut.

Rockwell Automation, Inc. provides industrial automation and digital transformation solutions in the United States and internationally. The company operates in three segments, Intelligent Devices, Software & Control, and Lifecycle Services. Its solutions include hardware and software products, and services. The Intelligent Devices segment offers drives, motion, safety, sensing, industrial components, and configured-to-order products. The Software & Control segment provides control and visualization software and hardware, information software, digital twin and simulation software, and network and security infrastructure solutions. The Lifecycle Services segment provides consulting, professional services and solutions, and connected and maintenance services. The company sells its solutions primarily through independent distributors in relation with its direct sales force. It serves discrete end markets, including automotive, semiconductor, warehousing and logistics, and other discrete markets, as well as general industries comprising printing and publishing, marine, glass, fiber and textiles, airports, and aerospace; hybrid end markets, such as food and beverage, life sciences, household and personal care, and tire, as well as eco industrial, including water/wastewater, waste management, mass transit, and renewable energy; and process end markets comprising oil and gas, mining, metals, chemicals, pulp and paper, and others. Rockwell Automation, Inc. was founded in 1903 and is headquartered in Milwaukee, Wisconsin.

Xylem Inc., together with its subsidiaries, engages in the design, manufacture, and servicing of engineered products and solutions for the water and wastewater applications in the United States, Europe, the Asia Pacific, and internationally. It operates through three segments: Water Infrastructure, Applied Water, and Measurement & Control Solutions. The Water Infrastructure segment offers various products, including water, storm water, and wastewater pumps; controls and systems; filtration, disinfection, and biological treatment equipment; and mobile dewatering equipment under the Flygt, Godwin, Wedeco, Sanitaire, Leopold, Wedeco, and Xylem Vue brand names for the transportation and treatment of water. The Applied Water segment provides pumps, valves, heat exchangers, controls, and dispensing equipment systems under the Goulds Water Technology, Bell & Gossett, A-C Fire Pump, Standard Xchange, Lowara, Jabsco, Xylem Vue and Flojet brand names for residential and commercial building services, and industrial water applications. The Measurement & Control Solutions segment provides smart meters, networked communication devices, and measurement and control technologies, as well as critical infrastructure technologies. It also offers software and services, including cloud-based analytics, remote monitoring and data management, leak detection, condition assessment, asset management, and pressure monitoring solutions, as well as testing equipment and managed services. This segment sells its products under the Pure, Sensus, Smith Blair, WTW, Xylem Vue, and YSI brand names. The company markets and sells its products through a network of direct sales force, resellers, distributors, and value-added solution providers. Xylem Inc. was formerly known as ITT WCO, Inc. and changed its name to Xylem Inc. in May 2011. The company. was incorporated in 2011 and is headquartered in Rye Brook, New York.

Dover Corporation provides equipment and components, consumable supplies, aftermarket parts, software and digital solutions, and support services worldwide. The Engineered Products segment provides various equipment, component, software, solution, and services that are used in aftermarket vehicle service, solid waste handling, industrial automation, aerospace and defense, industrial winch and hoist, and fluid dispensing end-market. This segment also offers manual and power clamp, rotary and linear mechanical indexer, conveyor, pick and place unit, glove port, and manipulator, as well as end-of-arm robotic gripper, slide, and end effector. Its Clean Energy & Fueling segment offers component, equipment, and software and service solution enabling safe transport of traditional and clean fuel, and other hazardous substance along with supply chain, as well as operation of convenience retail, retail fueling, and vehicle wash establishment. The Imaging and Identification segment provides precision marking and coding; packaging intelligence; product traceability equipment; brand protection; and digital textile printing equipment, as well as related consumable, software, and service to packaged and consumer good, pharmaceutical, industrial manufacturing, fashion and apparel, and other end-market. Its Pumps and Process Solutions segment manufactures specialty pump, connector, and flow meter, fluid connecting solution, plastics and polymer processing equipment, and engineered components for rotating and reciprocating machines. The Climate & Sustainability Technologies segment manufactures refrigeration system, refrigeration display case, commercial glass refrigerator and freezer door, and brazed plate heat exchanger for industrial heating and cooling, and residential climate control applications. It sells its products directly and through a network of distributors. The company was incorporated in 1947 and is headquartered in Downers Grove, Illinois.

Pentair plc provides various water solutions worldwide. It operates through Consumer Solutions; and Industrial & Flow Technologies segments. The Consumer Solutions segment designs, manufactures, and sells residential and commercial pool equipment and accessories, including pumps, filters, heaters, lights, automatic controls, automatic cleaners, maintenance equipment, and pool accessories for residential and commercial pool maintenance, repair, renovation, service, and construction applications; and water treatment products and systems comprising pressure tanks, control valves, activated carbon products, conventional filtration products, and point-of-entry and point-of-use systems for the use in residential whole home water filtration, drinking water filtration, and water softening solutions, as well as in commercial total water management and filtration in foodservice operations. It offers its products under the Everpure, Ken's Beverage, Kreepy Krauly, Pentair Water Solutions, Pleatco, RainSoft, and Sta-Rite brands. The Industrial & Flow Technologies segment manufactures and sells fluid treatment products, such as advanced membrane filtration products, separation systems, and membrane bioreactors; water supply and disposal, solid handling, fluid transfer, and turbine pumps; and valves, spray nozzles, process filtration systems, and gas recovery solutions for food and beverage, fluid separation technologies, water and wastewater treatment, water wells, pressure boosting, fire suppression, flood control, agricultural irrigation, crop spray, fluid circulation and transfer, fluid delivery, ion exchange, desalination, residential and municipal wells, and wastewater solids handling applications. It offers its products under the Pentair, Aurora, Berkeley, Codeline, Fairbanks-Nijhuis, Haffmans, Hydromatic, Hypro, Jung Pumpen, Myers, Sta-Rite, Shurflo, Südmo, and X-Flow brands. Pentair plc was founded in 1966 and is headquartered in London, the United Kingdom.

IDEX Corporation, together with its subsidiaries, provides applied solutions worldwide. The company operates through three segments: Fluid & Metering Technologies (FMT), Health & Science Technologies (HST), and Fire & Safety/Diversified Products (FSDP). The FMT segment designs, produces, and distributes positive displacement pumps, small volume provers, flow meters, injectors, and other fluid-handling pump modules and systems, as well as offers flow monitoring and other services for the food, chemical, general industrial, water and wastewater, agricultural, and energy industries. The HST segment designs, produces, and distributes precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems, pneumatic components and sealing solutions, high performance molded and extruded sealing components, custom mechanical and shaft seals, engineered hygienic mixers and valves, biocompatible medical devices and implantables, air compressors and blowers, optical components and coatings, laboratory and commercial equipment, precision photonic solutions, and precision gear and peristaltic pump technologies. This segment serves food and beverage, pharmaceutical and biopharmaceutical, cosmetics, marine, chemical, wastewater and water treatment, life sciences, research, and defense markets. The FSDP segment designs, produces, and distributes firefighting pumps, valves and controls, rescue tools, lifting bags, and other components and systems for the fire and rescue industry; engineered stainless steel banding and clamping devices for various industrial and commercial applications; and precision equipment for dispensing, metering, and mixing colorants and paints used in retail and commercial businesses. IDEX Corporation was incorporated in 1987 and is headquartered in Northbrook, Illinois.

Nordson Corporation engineers, manufactures, and markets products and systems to dispense, apply, and control adhesives, coatings, polymers, sealants, biomaterials, and other fluids worldwide. It operates through two segments, Industrial Precision Solutions (IPS) and Advanced Technology Solutions (ATS). The IPS segment provides dispensing, coating, and laminating systems for adhesives, lotions, liquids, and fibers to disposable products and roll goods; automated adhesive dispensing systems used in packaged goods industries; components and systems used in the thermoplastic melt stream; and product assembly systems for use in paper and paperboard converting applications, and manufacturing roll goods, as well as for the assembly of plastic, metal, and wood products. It also offers automated and manual dispensing products and systems to apply adhesive and sealant materials; dispensing and curing systems to coat and cure containers; systems to apply liquid paints and coatings to consumer and industrial products; and systems to apply powder paints and coatings to metal, plastic, and wood products, as well as ultraviolet equipment for use in curing and drying operations for specialty coatings, semiconductor materials, and paints. The ATS segment provides automated dispensing systems for the attachment, protection, and coating of fluids, as well as related gas plasma treatment systems for cleaning and conditioning surfaces; precision manual and semi-automated dispensers, minimally invasive interventional delivery devices, plastic molded syringes, cartridges, tips, fluid connection components, tubing, balloons, and catheters; and bond testing and automated optical, acoustic microscopy, and x-ray inspection systems for use in semiconductor and printed circuit board industries. The company markets its products through direct sales force, as well as distributors and sales representatives. Nordson Corporation was founded in 1935 and is headquartered in Westlake, Ohio.

ITT Inc. manufactures and sells engineered critical components and customized technology solutions for the transportation, industrial, and energy markets worldwide. The company operates through three segments: Motion Technologies, Industrial Process, and Connect & Control Technologies. The Motion Technologies segment manufactures brake pads, shims, shock absorbers, and energy absorption components; and sealing technologies primarily for the transportation industry, including passenger cars, trucks, light- and heavy-duty commercial and military vehicles, buses, and trains. The Industrial Process segment designs and manufactures industrial pumps, valves, and plant optimization and remote monitoring systems and services; and centrifugal and twin screw positive displacement pumps, as well as aftermarket solutions, such as replacement parts and services. It serves various customers in industries, such as chemical, energy, mining, and other industrial process markets. The Connect & Control Technologies segment designs and manufactures a range of engineered connectors and specialized control components for critical applications supporting various markets, including aerospace and defense, industrial, transportation, medical, and energy. This segment's connector product portfolio includes electrical connectors, such as circular, rectangular, radio frequency, fiber optic, D-sub miniature, micro-miniature, and cable assemblies, as well as control products consist of actuators, valves, and pumps and switches for flow control applications; rate controls, seat recline locks, and elastomer isolators for aircraft interiors; elastomeric bearings for rotorcraft vibration isolation; heaters, hoses, and composite ducting for environmental control systems; and advanced composites for engine applications. ITT Inc. was incorporated in 1920 and is headquartered in White Plains, New York.

Regal Rexnord Corporation, together with its subsidiaries, designs, manufactures, and sells industrial powertrain solutions, power transmission components, electric motors and electronic controls, air moving products, and specialty electrical components and systems worldwide. It operates through four segments: Commercial Systems, Industrial Systems, Climate Solutions, and Motion Control Solutions. The Commercial Systems segment provides AC and DC motors, electronic variable speed controls, fans, blowers, and precision stator and rotor kits. The Industrial Systems segment offers AC motors for industrial applications; electric alternators for prime and standby power applications to data centers, distributed energy, microgrid, rental marine, agriculture, healthcare, mobile, and defense markets; and switchgear for healthcare, government, and waste water applications, as well as residential, commercial, and industrial applications. The Climate Solutions segment provides fractional motors, electronic variable speed controls, and blowers for use in a residential and light commercial air moving applications; and fractional horsepower motors and blowers for white goods, water heating equipment, small pumps, compressors, and fans. The Motion Control Solutions segment offers bearings; conveyors; disc, gear, grid, elastomeric, and torsionally soft couplings; mechanical power transmission drives and components; worm gearing, shaft configuration, helical, bevel, helical bevel, worm, hypoid, and spur gearing products; and aerospace components. This segment serves beverage, bulk handling, metal, special machinery, energy, and aerospace and general industrial markets. The company sells its products directly to original equipment manufacturers and end-users through a network of direct and independent sales representatives, and distributors. The company was formerly known as Regal Beloit Corporation. The company was founded in 1955 and is headquartered in Beloit, Wisconsin.

A. O. Smith Corporation manufactures and markets residential and commercial gas, heat pump and electric water heaters, boilers, tanks, and water treatment products in North America, China, Europe, and India. It operates through two segments, North America and Rest of World. The company offers water heaters for residences, restaurants, hotels and motels, office buildings, laundries, car washes, and small businesses; commercial boilers for hospitals, schools, hotels, and other large commercial buildings, as well as residential boilers for homes, apartments, and condominiums; and water treatment products comprising point-of-entry water softeners, well water solutions, and whole-home water filtration products, on-the-go filtration bottles, point-of-use carbon, and reverse osmosis products for residences, restaurants, hotels, and offices. It also provides food and beverage filtration products; expansion tanks, commercial solar water heating systems, swimming pool and spa heaters, and related products and parts; and heat pumps, electric wall-hung, gas tankless, combi-boiler, heat pump and solar water heaters. The company offers its products primarily under the A. O. Smith, State, Lochinvar, and water softener brands. It distributes its products through independent wholesale plumbing distributors, as well as through retail channels consisting of hardware and home center chains, and manufacturer representative firms; and offers Aquasana branded products directly to consumers through e-commerce, as well as other online retailers. A. O. Smith Corporation was founded in 1874 and is headquartered in Milwaukee, Wisconsin.

Parsons Corporation provides integrated solutions and services in the defense, intelligence, and critical infrastructure markets in North America, the Middle East, and internationally. It operates through two segments, Federal Solutions and Critical Infrastructure. The company offers cyber security and intelligence services, as well as offensive and defensive cybersecurity platforms, tools, and operations to the U.S. Department of Defense and the United States intelligence community; space and geospatial solutions, such as geospatial intelligence, threat analytics, space situational awareness, small satellite launch and integration, satellite ground systems, fight dynamics, and command, and control solutions to the National Geospatial-Intelligence Agency, National Reconnaissance Office, and multiple units within the U.S. Department of Defense. It also provides missile defense and C5ISR solutions, such as integrated air and missile defense, data fusion and analytics, platform system integration, directed energy, joint all-domain operations, and command and control systems to Defense Intelligence Agency and the U.S. Department of Defense; technology services for energy production systems, aviation, healthcare and bio-surveillance systems, and environmental systems and associated infrastructure, as well as nuclear waste processing and treatment, weapons of mass destruction elimination, program and project management, infectious disease control analytics, and data protection solutions. In addition, the company offers intelligent transportation system management, aviation, rail and transit systems, smart cities software, and critical infrastructure cyber protection to the transportation authorities, rail, and transit entities; engineering services for infrastructure; and program management, and environmental solutions to private-sector industrial clients and public utilities. Parsons Corporation was founded in 1944 and is headquartered in Centreville, Virginia.

Generac Holdings Inc. designs, manufactures, and sells power generation equipment, energy storage systems, and other power products for the residential, and light commercial and industrial markets worldwide. The company offers engines, alternators, batteries, electronic controls, steel enclosures, and other components. It also provides residential automatic standby generators ranging in output from 7.5kW to 150kW; air-cooled engine residential standby generators ranging from 7.5kW to 26kW; liquid-cooled engine generators with outputs ranging from 22kW to 150kW; and Mobile Link, a remote monitoring system for home standby generators. In addition, the company offers various portable generators ranging in size from 800W to 17.5kW; outdoor power equipment, such as trimmers, field and brush mowers, log splitters, stump grinders, chipper shredders, lawn and leaf vacuums, pressure washers, and water pumps; and clean energy solution under the PWRcell and PWRview brands. Further, it provides light towers, mobile generators, and mobile energy storage systems; commercial mobile pumps and dust-suppression equipment; various gaseous-engine control systems and accessories; light-commercial standby generators ranging from 22kW to 150kW and related transfer switches providing three-phase power for small and mid-sized businesses; and industrial generators ranging in output from 10kW to 3,250kW used as emergency backup for healthcare, telecom, datacom, commercial office, retail, municipal, and manufacturing markets. Additionally, the company sells aftermarket service parts and product accessories to dealers. It distributes its products through independent residential dealers, industrial distributors and dealers, national and regional retailers, e-commerce partners, electrical, HVAC and solar wholesalers, catalogs, equipment rental companies and distributors, and solar installers; and directly to end users. The company was founded in 1959 and is headquartered in Waukesha, Wisconsin.

Crane Company, together with its subsidiaries, manufactures and sells engineered industrial products in the Americas, Europe, the Middle East, Asia, and Australia. The company has four business segments: Aerospace & Electronics, Process Flow Technologies, Payment & Merchandising Technologies, and Engineered Materials. The Aerospace & Electronics segment supplies critical components and systems, including original equipment and aftermarket parts, primarily for the commercial aerospace, and the military aerospace, defense, and space markets. This segment also offers pressure sensors for aircraft engine control, aircraft braking systems for fighter jets, power conversion solutions for spacecraft, and lubrication systems. The Process Flow Technologies segment provides engineered fluid handling equipment for mission critical applications. It offers process valves and related products, commercial valves, and pumps and systems. The Payment & Merchandising Technologies segment provides electronic equipment and associated software leveraging extensive, and proprietary core capabilities, including payment verification and authentication, as well as automation solutions, field service solutions, remote diagnostics, and productivity enhancing software solutions. The Engineered Materials segment manufactures fiberglass-reinforced plastic panels and coils, primarily for use in the manufacturing of recreational vehicles and in commercial and industrial buildings applications. It provides products and solutions to customers across end markets, including aerospace, defense, chemical and pharmaceutical, water and wastewater, payment automation, non-residential and municipal construction, energy, and banknote design and production, as well as for a range of general industrial and consumer applications. The company was formerly known as Crane Holdings, Co. Crane Company was founded in 1855 and is based in Stamford, Connecticut.

Donaldson Company, Inc. manufactures and sells filtration systems and replacement parts worldwide. The company operates through two segments, Engine Products and Industrial Products. Its Engine Products segment provides replacement filters for air and liquid filtration applications; air filtration systems; liquid filtration systems for fuel, lube, and hydraulic applications; exhaust and emissions systems and sensors; indicators; and monitoring systems. This segment sells its products to original equipment manufacturers (OEMs) in the construction, mining, agriculture, aerospace, defense, and transportation markets; and to independent distributors, OEM dealer networks, private label accounts, and large fleets. The company's Industrial Products segment offers dust, fume, and mist collectors; compressed air purification systems; gas and liquid filtration for food, beverage, and industrial processes; air filtration systems for gas turbines; polytetrafluoroethylene membrane-based products; and specialized air and gas filtration systems for applications, including hard disk drives, semi-conductor manufacturing and sensors, indicators, and monitoring systems. This segment sells its products to various dealers, distributors, OEMs of gas-fired turbines, and OEMs and end-users requiring air filtration solutions and replacement filters. Donaldson Company, Inc. was founded in 1915 and is headquartered in Bloomington, Minnesota.

Chart Industries, Inc. manufactures and sells engineered equipment for the energy and industrial gas industries worldwide. The company operates through four segments: Cryo Tank Solutions, Heat Transfer Systems, Specialty Products, and Repair, Service & Leasing. It provides bulk and packaged gas cryogenic solutions for the storage, distribution, vaporization, and application of industrial gases; cryogenic trailers, ISO containers, bulk storage tanks, loading facilities, and regasification equipment for delivering liquefied natural gas (LNG) into virtual pipeline applications; and large vacuum insulated storage tanks as equipment for purchasers of standard liquefaction plants. The company also offers process technology, liquefaction train, and critical equipment for the LNG, including small to mid-scale facilities, floating LNG applications, and large base-load export facilities; brazed aluminum, Core-in-Kettle, heat exchangers, cold boxes, air cooled heat exchangers, pressure vessels, and pipe works; and air cooled heat exchangers and axial cooling fans for the power, heating, ventilation, air conditioning, and refining applications. In addition, it provides highly engineered equipment that is used in specialty end-market applications for hydrogen, LNG, biogas, CO2 Capture, food and beverage, aerospace, lasers, cannabis, and water treatment; and cryogenic components, including vacuum insulated pipes, specialty liquid nitrogen, end-use equipment, and cryogenic flow meters. Additionally, it provides extended warranties, plant start-up, parts, 24/7 support, monitoring and process optimization, repairing, maintenance, and upgrading services; plant services on equipment, including brazed aluminum heat exchangers, cold boxes, etc.; and service locations that undertake installation, service, repair, maintenance, and refurbishment of cryogenic products, as well as equipment leasing solutions. The company was founded in 1859 and is based in Ball Ground, Georgia.

Flowserve Corporation designs, develops, manufactures, distributes, and services industrial flow management equipment in the United States, Europe, the Middle East, Africa, Asia, and internationally. It operates in two segments, Flowserve Pump Division (FPD) and Flow Control Division (FCD). The FPD segment offers custom and pre-configured pumps and pump systems, mechanical seals, auxiliary systems, replacement parts, upgrades, and related aftermarket services, including installation and commissioning services, seal systems spare parts, repairs, advanced diagnostics, re-rate and upgrade solutions, retrofit programs, and machining and asset management solutions, as well as manufactures a gas-lubricated mechanical seal for use in high-speed compressors for gas pipelines. The FCD segment provides engineered and industrial valve and automation solutions, including isolation and control valves, actuation, controls, and related equipment, as well as equipment maintenance services for flow control systems, including advanced diagnostics, repair, installation, commissioning, retrofit programs, and field machining capabilities. This segment's products are used to control, direct, and manage the flow of liquids, gases, and fluids. The company primarily serves oil and gas, chemical and pharmaceuticals, power generation, and water management markets, as well as general industries, including mining and ore processing, pulp and paper, food and beverage, and other smaller applications. The company distributes its products through direct sales, distributors, and sales representatives. Flowserve Corporation was incorporated in 1912 and is headquartered in Irving, Texas.

The Middleby Corporation designs, manufactures, markets, distributes, and services a range of foodservice, food processing, and residential kitchen equipment in the United States, Canada, Asia, Europe, the Middle East, and Latin America. Its Commercial Foodservice Equipment Group segment offers conveyor, combi, convection, baking, proofing, deck, speed cooking, and hydrovection ovens; ranges, fryers, rethermalizers; steam cooking, food warming, catering, induction cooking, and countertop cooking equipment; heated cabinets, charbroilers, ventless cooking systems, kitchen ventilation, toasters, griddles, charcoal grills, professional mixers, stainless steel fabrication, custom millwork, professional refrigerators, blast chillers, cold rooms, ice machines, and freezers; and soft serve ice cream, coffee and beverage dispensing, home and professional craft brewing equipment, fry dispensers, bottle filling and canning equipment, and IoT solutions. The company's Food Processing Equipment Group segment provides batch, baking, proofing, conveyor belt, and continuous processing ovens; frying and automated thermal processing systems; tumblers, massagers, grinders, slicers, reduction and emulsion systems, mixers, formers, and blenders; battering, breading, and seeding equipment; water cutting systems, food presses, food suspension equipment, filling and depositing solutions, and forming equipment; and food safety, food handling, freezing, and defrosting and packaging equipment for customers producing hot dog, dinner sausage, poultry, and lunchmeat, as well as muffin, cookie, and bread products. Its Residential Kitchen Equipment Group segment offers kitchen equipment comprising cookers, stoves, dishwashers, microwaves, cooktops, wine coolers, ice machines, and ventilation and outdoor equipment. The company was formerly known as Middleby Marshall Oven Company and changed its name to The Middleby Corporation in 1985. The company was founded in 1888 and is based in Elgin, Illinois.

Watts Water Technologies, Inc. designs, manufactures, and sells products, solution, and systems that manage and conserve the flow of fluids and energy into, through and out of buildings in the commercial and residential markets in the Americas, Europe, the Asia-Pacific, the Middle East, and Africa. The company offers residential and commercial flow control products, including backflow preventers, water pressure regulators, temperature and pressure relief valves, and thermostatic mixing valves. It also provides heating, ventilation, and air conditioning and gas products, such as boilers, water heaters, custom heat, and hot water solutions; hydronic and electric heating systems for under-floor radiant applications; custom heat and hot water solutions; hydronic pump groups for boiler manufacturers and alternative energy control packages; and flexible stainless steel connectors for natural and liquid propane gas in commercial food service and residential applications. In addition, the company offers drainage and water re-use products comprising drainage products and engineered rain water harvesting solutions for commercial, industrial, marine, and residential applications; and water quality products that include point-of-use and point-of-entry water filtration, conditioning, and scale prevention systems for commercial and residential applications. Further, it provides smart mixing system under the IntelliStation name. The company sells its products to plumbing, heating, and mechanical wholesale distributors and dealers, as well as original equipment manufacturers, specialty product distributors, do-it-yourself chains, and retail chains; and directly to wholesalers and private label accounts. Watts Water Technologies, Inc. was founded in 1874 and is headquartered in North Andover, Massachusetts.

SPX Technologies, Inc. supplies infrastructure equipment serving the heating, ventilation, and cooling (HVAC); and detection and measurement markets in the United States, China, the United Kingdom, and internationally. The company operates in two segments, HVAC and Detection and Measurement. The HVAC segment engineers, designs, manufactures, installs, and services package and process cooling products and engineered air movement solutions for the HVAC industrial and power generation markets, as well as boilers and comfort heating and ventilation products for the residential and commercial markets. It offers its products under the Marley, Recold, SGS, Cincinnati Fan, Berko, Qmark, Fahrenheat, Leading Edge, Patterson-Kelley, Weil-McLain, and Williamson-Thermoflo brands. The Detection and Measurement segment offers underground pipe and cable locators, inspection and rehabilitation equipment, and robotic systems under the Radiodetection, Pearpoint, Schonstedt, Dielectric, Riser Bond, Warren G-V, Cues, ULC Robotics, and Sensors & Software brands; and bus fare collection systems, communication technologies, and obstruction lighting products under the Genfare, TCI, Flash Technology, Sabik Marine, Sealite, Avlite, and ECS brands. The company markets its products through independent manufacturing representatives, third-party distributors, and retailers, as well as direct to customers. The company was formerly known as SPX Corporation and changed its name to SPX Technologies, Inc. in August 2022. SPX Technologies, Inc. was founded in 1912 and is headquartered in Charlotte, North Carolina.

CSW Industrials, Inc. operates as a diversified industrial company in the United States and internationally. It operates through three segments: Contractor Solutions, Engineered Building Solutions, and Specialized Reliability Solutions. The Contractor Solutions segment provides cements, diffusers, grilles, registers, solvents, thread sealants, traps, and vents for use in HVAC/R, plumbing, general industrial, architecturally, and specified building products. The Engineered Building Solutions segment offers architectural railings and associated services; fire and smoke protection solutions; and pre-engineered and custom architectural building components for use in architecturally specified building products. The Specialized Reliability Solutions segment provides compounds, lubricants, lubricant management products, and sealants; and contamination control, industrial maintenance and repair, and operations solutions for use in energy, general industrial, mining, and railing markets. The company was incorporated in 2014 and is headquartered in Dallas, Texas.

Gates Industrial Corporation plc manufactures and sells engineered power transmission and fluid power solutions worldwide. It operates in two segments, Power Transmission and Fluid Power. The company offers synchronous or asynchronous belts, including V-belts, CVT belts, and Micro-V belts, as well as related components, such as sprockets, pulleys, water pumps, tensioners, or other accessories; solutions for stationary and mobile drives, engine systems, personal mobility, and vertical lifts application platforms; metal drive components; and kits for automotive replacement channels. It also provides fluid power solutions comprising stationary hydraulics, mobile hydraulics, engine systems, and other industrial application platforms; and hydraulics, including hoses, tubing, and fittings, as well as assemblies. The company serves construction, agriculture, energy and resources, automotive, transportation, mobility and recreation, consumer products, and various industrial applications, such as automated manufacturing and logistics systems. It sells its engineered products under the Gates brand. The company offers its products to replacement channel customers, as well as to original equipment manufacturers. Gates Industrial Corporation plc was founded in 1911 and is headquartered in Denver, Colorado.

Franklin Electric Co., Inc., together with its subsidiaries, designs, manufactures, and distributes water and fuel pumping systems worldwide. It operates through three segments: Water Systems, Fueling Systems, and Distribution. The Water Systems segment offers submersible motors, pumps, drives, electronic controls, water treatment systems, monitoring devices, and related parts and equipment. Its motors and pumps are used principally for pumping clean water and wastewater in various residential, agricultural, municipal, and industrial applications; and manufactures electronic drives and controls that are used in motors for controlling functionality, as well as provides protection from various hazards, such as electrical surges, over-heating, and dry wells or tanks. The Fueling Systems segment provides pumps, pipes, sumps, fittings, vapor recovery components, electronic controls, monitoring devices, and related parts and equipment primarily for use in fueling system applications. This segment serves other energy markets, such as power reliability systems, as well as includes electronic devices for online monitoring of the power utility, hydroelectric, and telecommunication and data center infrastructure. The Distribution segment sells to and provides presale support and specifications to the installing contractors. It sells products produced by the Water Systems segment. The company sells its products to wholesale and retail distributors, specialty distributors, original equipment manufacturers, industrial and petroleum equipment distributors, and oil and utility companies through its employee sales force and independent manufacturing representatives. Franklin Electric Co., Inc. was founded in 1944 and is headquartered in Fort Wayne, Indiana.

Kadant Inc. supplies technologies and engineered systems worldwide. It operates through three segments: Flow Control, Industrial Processing, and Material Handling. The Flow Control segment develops, manufactures, and markets fluid-handling systems and equipment, such as rotary joints, syphons, turbulator bars, expansion joints, and engineered steam and condensate systems; and doctoring, cleaning, and filtration systems and related consumables, consisting of doctor systems and holders, doctor blades, shower and fabric-conditioning systems, formation systems, and water-filtration systems. The Industrial Processing segment develops, manufactures, and markets ring and rotary debarkers, stranders, chippers, logging machinery, industrial automation and control systems, recycling and approach flow systems, and virgin pulping process equipment for use in the packaging, tissue, wood products, and alternative fuel industries. The Material Handling segment offers conveying and vibratory equipment, and balers and related equipment; and manufactures and sells biodegradable absorbent granules for carriers in as carriers in agricultural, home lawn and garden, professional lawn, turf, and ornamental applications, as well as for oil and grease absorption. The company was formerly known as Thermo Fibertek Inc. and changed its name to Kadant Inc. in July 2001. Kadant Inc. was incorporated in 1991 and is headquartered in Westford, Massachusetts.

Mirion Technologies, Inc. provides radiation detection, measurement, analysis, and monitoring products and services in the United States, Canada, the United Kingdom, France, Germany, Finland, China, Belgium, Netherlands, Estonia, and Japan. It operates through two segments, Medical and Industrial. The medical segment offers radiation oncology quality assurance and dosimetry solutions; patient safety solutions for diagnostic imaging and radiation therapy centers; radiation therapy quality assurance solutions for calibrating and verifying imaging and treatment accuracy; and radionuclide therapy products for nuclear medicine applications, such as shielding, product handling, medical imaging furniture, and rehabilitation products. This segment supports applications in medical diagnostics, cancer treatment, practitioner safety, and rehabilitation. The Industrial segment focuses on addressing critical radiation safety, measurement, and analysis applications; and provides personal radiation detection, identification equipment, and analysis tools. The company's products and solutions also include nuclear medicines, dosimeters, contamination and clearance monitors, reactor instrumentation and control equipment and systems, medical and industrial imaging systems and related accessories, alpha spectroscopy instruments, alpha/beta counting instruments, and gamma spectroscopy detector systems; and electrical penetration, cancer diagnostics, software, and other services. It serves hospitals, clinics and urgent care facilities, dental and veterinary offices, radiation treatment facilities, OEMs for radiation therapy, laboratories, military organizations, government agencies, industrial companies, power and utility companies, reactor design firms, and NPPs. The company was formerly known as Global Monitoring Systems, Inc. and changed its name to Mirion Technologies, Inc. in January 2006. Mirion Technologies, Inc. was incorporated in 2005 and is headquartered in Atlanta, Georgia.

EnPro Industries, Inc. engages in the design, development, manufacture, marketing, and service of engineered industrial products in the United States, Europe, and internationally. It operates through three segments: Sealing Technologies, Advanced Surface Technologies, and Engineered Materials. The Sealing Technologies segment offers single-use hygienic seals, tubing, components and assemblies; metallic, non-metallic, and composite material gaskets; compression packing products; hydraulic components; expansion joints; wall penetration products; and dynamic, flange, resilient metal, elastomeric, and custom-engineered mechanical seals for chemical and petrochemical processing, pulp and paper processing, power generation, food and pharmaceutical processing, primary metal manufacturing, mining, water and waste treatment, heavy-duty trucking, aerospace, medical, filtration, and semiconductor fabrication industries. This segment also provides aseptic fluid transfer products for the pharmaceutical and biopharmaceutical industries. The Advanced Surface Technologies segment offers cleaning, coating, testing, refurbishment, and verification services for critical components and assemblies used in semiconductor manufacturing equipment, as well as for critical applications in the space, aerospace, and defense markets; and specialized optical filters and thin-film coatings for various applications in the industrial technology, life sciences, and semiconductor markets. The Engineered Materials segment provides self-lubricating, non-rolling, metal polymer, engineered plastics, and fiber reinforced composite bearing products for various applications in the automotive, pharmaceutical, pulp and paper, natural gas, health, power generation, machine tools, air treatment, refining, petrochemical, and general industrial markets. The company was incorporated in 2002 and is headquartered in Charlotte, North Carolina.

John Bean Technologies Corporation provides technology solutions to food and beverage industry and equipment and services to air transportation industries. The company operates through two segments: JBT FoodTech and JBT AeroTech. It offers poultry processing, mixing/grinding, injecting, marinating, tumbling, portioning, packaging, coating, cooking, frying, freezing, weighing, X-ray food inspection, and food safety solutions. The company also provides processing solutions for extracting, mixing, blending, pasteurizing, sterilizing, concentrating, high pressure processing, filling, closing, sealing, and final packaging, as well as processing equipment; and packaging systems for poultry, beef, pork, seafood, ready-to-eat meals, fruits, vegetables, dairy, bakery, pet foods, soups, sauces, and juices. In addition, it offers automated guided vehicle systems for material movement in the manufacturing, warehouse, and medical facilities. Further, the company provides mobile air transportation equipment, such as commercial and defense cargo loading, aircraft deicing, aircraft towing, and aircraft ground power and cooling systems; and fixed equipment for passenger boarding. Additionally, it offers airport equipment, systems, and facilities maintenance services to domestic and international airport authorities, passenger airlines, airfreight and ground handling companies, defense forces, and defense contractors. The company markets and sells its products and solutions through direct sales force, independent distributors, and sales representatives. John Bean Technologies Corporation was incorporated in 1994 and is headquartered in Chicago, Illinois.

Mueller Water Products Inc. manufactures and markets products and services used in the transmission, distribution, and measurement of water in North America and internationally. Its products and services are used by municipalities, and the residential and non-residential construction industries. It operates through two segments, Infrastructure and Technologies. The company's Infrastructure segment manufactures and sells valves for water and gas systems, including iron gate, butterfly, tapping, check, knife, plug, automatic control, and ball valves; and dry-barrel and wet-barrel fire hydrants and service brass products, as well as a line of pipe repair products, such as clamps and couplings used to repair leaks. This segment offers its products under Canada Valve, Centurion, Ez-Max, Hydro Gate, Hydro-Guard, HYMAX, HYMAX VERSA, Jones, Krausz, Milliken, Mueller, Pratt, Pratt Industrial, Repamax, Repaflex, and Singer brands. Its Technologies segment offers residential and commercial water metering, water leak detection and pipe condition assessment products, systems, and services. It offers products under Echologics, Echoshore, ePulse, Hersey, LeakFinderRT, LeakFinderST, LeakListener, LeakTuner, Mi.Echo, Mi.Data, Mi.Hydrant, Mi.Net, Mueller Systems, and Sentryx brands. The company was founded in 1857 and is headquartered in Atlanta, Georgia.

Crane NXT, Co. focuses on payment and merchandising technologies. It indents to offer electronic equipment and associated software leveraging extensive, and proprietary core capabilities, including payment verification and authentication, as well as automation solutions, field service solutions, remote diagnostics, and productivity enhancing software solutions. The company is based in Stamford, Connecticut.

ATS Corporation, together with its subsidiaries, provides automation solutions worldwide. The company is also involved in planning, designing, building, commissioning, and servicing automated manufacturing and assembly systems, including automation products and test solutions. In addition, it offers pre-automation services comprising discovery and analysis, concept development, simulation, and total cost of ownership modelling; post automation services, including training, process optimization, preventative maintenance, emergency and on-call support, spare parts, retooling, retrofits, and equipment relocation; and contract manufacturing services, as well as after sales and services. Further, the company provides engineering design, prototyping, process verification, specification writing, software and manufacturing process controls development, standard automation products/platforms, equipment design and build, third-party equipment qualification, procurement and integration, automation system installation, product line commissioning, validation, and documentation services. Additionally, it offers value engineering, supply chain management, and integration and manufacturing capabilities, as well as other automation products and solutions; and software and digital solutions comprising connected factory floor management systems to capture, analyze, and use real time machine performance data to troubleshoot, deliver process and product solutions, prevent equipment downtime, drive operational efficiency, and unlock performance for sustainable production improvements. ATS Corporation serves life sciences, transportation and mobility, consumer products, food and beverage, electronics, nuclear, packaging, warehousing and distribution, and energy markets. The company was formerly known as ATS Automation Tooling Systems Inc. and changed its name to ATS Corporation in November 2022. ATS Corporation was founded in 1978 and is headquartered in Cambridge, Canada.

Enerpac Tool Group Corp. manufactures and sells a range of industrial products and solutions in the United States, the United Kingdom, Germany, Australia, Canada, China, Saudi Arabia, Brazil, and internationally. It operates in two segments, Industrial Tools & Services (IT&S) and Other. The IT&S segment designs, manufactures, and distributes branded hydraulic and mechanical tools; and provides services and tool rentals to the infrastructure, industrial maintenance, repair and operations, oil and gas, mining, renewable energy, and construction markets. It also offers branded tools and engineered heavy lifting technology solutions, and hydraulic torque wrenches; maintenance and manpower services; high-force hydraulic and mechanical tools, including cylinders, pumps, valves, and specialty tools; and bolt tensioners and other miscellaneous products. This segment markets its branded tools and services primarily under the Enerpac, Hydratight, Larzep, and Simplex brands. The Other segment designs and manufactures synthetic ropes and biomedical textiles. The company was formerly known as Actuant Corporation and changed its name to Enerpac Tool Group Corp. in January 2020. Enerpac Tool Group Corp. was incorporated in 1910 and is headquartered in Menomonee Falls, Wisconsin.

Enovis Corporation operates as a medical technology company worldwide. It develops, manufactures, and distributes medical device products used by orthopedic specialists, surgeons, primary care physicians, pain management specialists, physical therapists, podiatrists, chiropractors, athletic trainers, and other healthcare professionals to treat patients with musculoskeletal conditions resulting from degenerative diseases, deformities, traumatic events, and sports related injuries. It offers rigid and soft orthopedic bracings, hot and cold therapy products, bone growth stimulators, vascular therapy systems and compression garments, therapeutic shoes and inserts, electrical stimulators used for pain management, and physical therapy products; and a suite of reconstructive joint products for the hip, knee, shoulder, elbow, foot, ankle, and finger. Enovis Corporation sells its products through independent distributors, such as healthcare professionals, consumer retail stores, and pharmacies; and directly under the DJO brand. The company was formerly known as Colfax Corporation. Enovis Corporation is headquartered in Wilmington, Delaware.

Standex International Corporation, together with subsidiaries, manufactures and sells various products and services for commercial and industrial markets in the United States and internationally. It operates through five segments: Electronics, Engraving, Scientific, Engineering Technologies, and Specialty Solutions. The Electronics segment offers reed relays, fluid level, proximity, motion, flow, HVAC condensate, and custom electronics sensors; and current sense and advanced planar transformer technologies, value added assemblies, and mechanical packaging, as well as custom wound transformers and inductors for low and high frequency applications. The Engraving segment provides mold texturizing, slush molding tools, roll engraving, hygiene product tooling, and low observation vents, as well as project management and design services for stealth aircraft; and process machinery for various industries. The Scientific segment offers temperature controlled equipment for the medical, scientific, pharmaceutical, biotech, and industrial markets. The Engineering Technologies segment offers net and near net formed single-source customized solutions that are used in the manufacture of engineered components for the aviation, aerospace, defense, energy, industrial, medical, marine, oil and gas, and manned and unmanned space markets. The Specialty Solutions segment manufactures and sells refrigerated, heated and dry merchandizing display cases, custom fluid pump solutions, single and double acting telescopic, and piston rod hydraulic cylinders. Standex International Corporation was founded in 1955 and is headquartered in Salem, New Hampshire.

Barnes Group Inc. provides engineered products, industrial technologies, and solutions in the United States and internationally. It operates in two segments: Industrial and Aerospace. The Industrial segment offers precision components, products, and systems used by various customers in end-markets, such as mobility, industrial equipment, automation, personal care, packaging, electronics, and medical devices. This segment also designs and manufactures hot runner systems, mold cavity sensors and process control systems, and precision high cavitation mold assemblies for injection molding applications; provides force and motion control solutions for various metal forming and other industrial markets; and designs and develops robotic grippers, end-of-arm tooling systems, sensors, and other automation components for intelligent robotic handling solutions and industrial automation applications. In addition, it manufactures and supplies precision mechanical products, including mechanical springs, and high-precision punched and fine-blanked components used in transportation and industrial applications. This segment sells its products primarily through its direct sales force and distribution channels. The Aerospace segment produces fabricated and precision machined components and assemblies for turbine engines; and nacelles and structures for commercial and defense-related aircraft. It also provides aircraft engine component maintenance, repair, and overhaul services for turbine engine manufacturers, commercial airlines, and defense market; and manufactures and delivers aerospace aftermarket spare parts. This segment serves original equipment manufacturing industry. Barnes Group Inc. was founded in 1857 and is headquartered in Bristol, Connecticut.

Hillenbrand, Inc. operates as a diversified industrial company in the United States and internationally. It operates in three segments: Advanced Process Solutions, Molding Technology Solutions, and Batesville. The Advanced Process Solutions segment designs, engineers, manufactures, markets, and services process and material handling equipment and systems comprising compounding, extrusion, and material handling equipment, as well as offers equipment system design services; and provides screening and separating equipment for various industries, including plastics, food and pharmaceuticals, chemicals, fertilizers, minerals, energy, wastewater treatment, forest products, and other general industrials. The Molding Technology Solutions segment offers injection molding and extrusion equipment; hot runner systems; process control systems; and mold bases and components for various industries, including automotive, consumer goods, medical, packaging, construction, and electronics. The Batesville segment designs, manufactures, distributes, and sells funeral services products and solutions, such as burial caskets, cremation caskets, containers and urns, other personalization and memorialization products, and web-based technology applications. The company was founded in 1906 and is headquartered in Batesville, Indiana.

Xometry, Inc. operates a marketplace that enables buyers to source manufactured parts and assemblies in the United States and internationally. It provides CNC machining, milling, and turning services; sheet, laser, waterjet, and plasma cutting services; and sheet metal forming services. The company also offers 3D printing services, such as carbon digital light synthesis, fused deposition modeling, HP multi jet fusion, PolyJet, selective laser sintering, stereolithography, metal 3D printing service, direct metal laser sintering, and metal binder jetting; and injection molding services, including plastic injection, over, insert, and prototype molding, as well as bridge and production tooling. In addition, it provides other services comprising urethane and die casting, vapor smoothing, finishing, rapid prototyping, high- volume production, and assembly services. The company offers its products under the Allied Machine & Engineering, Brubaker, HTC, OSG, Kyocera, Mitsubishi Materials, SOWA, Viking Drill & Tool, Dauphin, and Sandvik brands. It serves aerospace and defense, automotive, consumer products, product designers, education, electronic and semiconductors, energy, hardware startups, industrial, medical and dental, robotics, and supply chain and purchasing industries. The company was formerly known as NextLine Manufacturing Corp. and changed its name to Xometry, Inc. in June 2015. Xometry, Inc. was incorporated in 2013 and is headquartered in Derwood, Maryland.

Helios Technologies, Inc., together with its subsidiaries, develops, manufactures, and sells solutions for the hydraulics and electronics markets in the Americas, Europe, the Middle East, Africa, and the Asia Pacific. The company operates in two segments, Hydraulics and Electronics. The Hydraulics segment offers cartridge valve technology products to control rates and direction of fluid flow, and to regulate and control pressures for industrial and mobile applications; quick release coupling solutions for the agriculture, construction equipment, and industrial markets; and hydraulic system design that provides engineered solutions for machine users, manufacturers, or designers. This segment sells its products under the Sun Hydraulics, Faster, and Custom Fluidpower brands. The Electronics segment offers displays, controls, and instrumentation products for off-highway, recreational and commercial marine, power sports and specialty vehicles, agriculture and water pumping, power generation, health and wellness, and engine-driven industrial equipment markets. This segment sells its products under the Enovation Controls, Murphy, and Balboa Water Group brands. It sells its hydraulic products primarily through value-add distributors, as well as directly to original equipment manufacturers; and electronic products to original equipment manufacturer customers. The company was formerly known as Sun Hydraulics Corporation and changed its name to Helios Technologies, Inc. in June 2019. Helios Technologies, Inc. was founded in 1970 and is headquartered in Sarasota, Florida.

Tennant Company, together with its subsidiaries, designs, manufactures, and markets floor cleaning equipment in the Americas, Europe, the Middle East, Africa, and the Asia Pacific. The company offers a suite of products, including floor maintenance and cleaning equipment, detergent-free and other sustainable cleaning technologies, aftermarket parts and consumables, equipment maintenance and repair services, specialty surface coatings, and asset management solutions. It also provides business solutions, such as financing, rental, and leasing programs, as well as machine-to-machine asset management solutions. The company offers its products under the Tennant, Nobles, Alfa Uma Empresa Tennant, IRIS, VLX, IPC, Gaomei, and Rongen brands, as well as private-label brands. Its products are used in retail establishments and distribution centers; factories and warehouses; and public venues, such as arenas and stadiums, office buildings, schools and universities, hospitals and clinics, parking lots and streets, and other environments. It markets its products to contract cleaners and businesses through direct sales and service organizations, as well as through a network of authorized distributors. Tennant Company was founded in 1870 and is headquartered in Eden Prairie, Minnesota.

Kornit Digital Ltd. develops, designs, and markets digital printing solutions for the fashion, apparel, and home decor segments of printed textile industry in the United States, Europe, the Middle East, Africa, the Asia Pacific, and internationally. The company's solutions include digital printing systems, ink and other consumables, associated software, and value-added services. Its products and services include direct-to-garment printing platform for smaller industrial operators to mass producers; NeoPigment ink and other consumables; QuickP designer software; and maintenance and support, consulting, and professional services. The company serves decorators, online businesses, brand owners, and contract printers. Kornit Digital Ltd. was incorporated in 2002 and is headquartered in Rosh HaAyin, Israel.

The Gorman-Rupp Company designs, manufactures, and sells pumps and pump systems in the United States and internationally. The company's products include self-priming centrifugal, standard centrifugal, magnetic drive centrifugal, axial and mixed flow, vertical turbine line shaft, submersible, high pressure booster, rotary gear, diaphragm, bellows, and oscillating pumps. Its products are used in water, wastewater, construction, dewatering, industrial, petroleum, original equipment, agriculture, fire protection, military, and other liquid-handling applications, as well as in heating, ventilating, and air conditioning applications. The company markets its products through a network of distributors, manufacturers' representatives, third-party distributor catalogs, direct sales, and commerce. The Gorman-Rupp Company was founded in 1933 and is headquartered in Mansfield, Ohio.

Thermon Group Holdings, Inc. provides engineered industrial process heating solutions for process industries worldwide. Its products include electric heating products, such as air heaters and heating accessories, boilers and calorifiers, controlling and monitoring solutions, heat tracing systems, tank heating systems, thermostats, tubing bundles, and system accessories, as well as strip, tubular, immersion, and process heaters; and gas heating products, including enclosure and explosion proof gas catalytic heaters, gas fired blowers, and gas heating accessories that comprise regulators, valves, mounting brackets, and battery cables. The company also offers specialty products, which include CEMS and analytical systems, commercial construction products and services, control panels, engineered products, compressed gas scrubbing systems, temporary power solutions, and snow clearing devices for rail track and switch equipment; and steam heating solutions comprising heat transfer compounds, steam heated bundles, steam supply and condensate return lines, steam tracing solutions, steam trace accessories, and tank heating products. In addition, it provides design engineering solutions that include design optimization studies, product selection assistance, and computer-generated drawing packages; energy audit services; procurement and project management services; procurement and project management services; turnkey construction installation; recurring facility assessment or audit; maintenance services; and technical support services. The company offers its solutions to chemical and petrochemical, oil and gas, power generation, rail and transit, commercial, transportation, food and beverage, pharmaceutical, and mineral processing industries, as well as data centers, semiconductor facilities, and other markets through a network of sales and service professionals, and distributors. Thermon Group Holdings, Inc. was founded in 1954 and is headquartered in Austin, Texas.

American Superconductor Corporation, together with its subsidiaries, provides megawatt-scale power resiliency solutions worldwide. The company operates in two segments, Grid and Wind. The Grid segment offers products and services that enable electric utilities, industrial facilities, and renewable energy project developers to connect, transmit, and distribute power under the Gridtec Solutions brand; and engineering planning services. It provides transmission planning services, which identify power grid congestion, poor power quality, and other risks; grid interconnection solutions for wind farms and solar power plants, power quality systems, and transmission and distribution cable systems; resilient electric grid systems, resilient electric grid systems; D-VAR systems used for controlling power flow and voltage in the AC transmission system; actiVAR system, a fast-switching medium-voltage reactive compensation solution; armorVAR system installed for reactive compensation, power factor correction, loss reduction, utility bill savings, and mitigation of common power quality concerns related to power converter-based generation and load devices; and D-VAR volt var optimization (VVO) that serves the distribution power grid market. This segment also offers ship protection systems, which reduce a naval ship's magnetic signature; and in board power delivery systems, power generation systems, and propulsion systems; and transformers and rectifiers systems. The Wind segment designs wind turbine systems and licenses these designs to third parties under the Windtec Solutions brand. It supplies power electronics and software-based control systems, engineered designs, and support services; and provides customer support services to wind turbine manufacturers. This segment's design portfolio comprises a range of drivetrains and power ratings of 2 megawatts and higher. The company was incorporated in 1987 and is headquartered in Ayer, Massachusetts.

NET Power Inc. operates as a clean energy technology company. It invents, develops, and licenses clean power generation technology. The company was founded in 2010 and is headquartered in Durham, North Carolina.

Serve Robotics Inc. designs, develops, and operates low-emission robots that serve people in public spaces with food delivery in the United States. It builds self-driving delivery robots. The company was formerly known as Patricia Acquisition Corp. and changed its name to Serve Robotics Inc. in July 2023. Serve Robotics Inc. was founded in 2017 and is based in Redwood City, California.

Graham Corporation, together with its subsidiaries, designs and manufactures fluid, power, heat transfer, and vacuum equipment for chemical and petrochemical processing, defense, space, petroleum refining, cryogenic, energy, and other industries. It offers power plant systems comprising ejectors and surface condensers; torpedo ejection and power systems, such as turbines, alternators, regulators, pumps, and blowers; and thermal management systems, including pumps, blowers, and electronics. The company also provides rocket propulsion systems, such as turbopumps and fuel pumps; cooling systems comprising pumps, compressors, fans, and blowers; and life support systems, including fans, pumps, and blowers. In addition, it offers heat transfer and vacuum systems comprising ejectors, process condensers, surface condensers, liquid ring pumps, heat exchangers, and nozzles, as well as turbomachinery products; and power generation systems, including turbines, generators, compressors, and pumps. The company also services and sells spare parts for its equipment. It sells its products directly in the United States, the Middle East, Canada, Asia, South America, and internationally. Graham Corporation was founded in 1936 and is headquartered in Batavia, New York.

Ballard Power Systems Inc. engages in the design, development, manufacture, sale, and service of proton exchange membrane (PEM) fuel cell products. The company offers its products for power product markets, consisting of heavy-duty motives, such as bus, truck, rail, and marine applications; material handling; and backup power. It also provides technology solutions, including engineering and technology transfer, as well as licenses and sells intellectual property portfolio and fundamental knowledge for various PEM fuel cell applications; and hydrogen fuel cell powertrain and vehicle systems integration solutions. It operates in China, Germany, the United States, the United Kingdom, Canada, Denmark, Norway, Belgium, Japan, France, Spain, Taiwan, Poland, India, Ukraine, Sweden, and internationally. The company has a strategic alliance with Linamar Corporation for the co-development and sale of fuel cell powertrains and components for class 1 and 2 vehicles in North America and Europe. Ballard Power Systems Inc. was founded in 1979 and is headquartered in Burnaby, Canada.

Omega Flex, Inc., together with its subsidiaries, manufactures and sells flexible metal hoses and accessories in North America and internationally. It offers flexible gas piping for use in residential and commercial buildings, as well as its fittings; and corrugated medical tubing for use in hospitals, ambulatory care centers, dental, physician and veterinary clinics, laboratories, and other facilities. The company sells its products under the TracPipe, CounterStrike, AutoSnap, AutoFlare, DoubleTrac, DEF-Trac, and MediTrac brand names. It serves various markets, including construction, manufacturing, transportation, petrochemical, pharmaceutical, and other industries. The company sells its products through independent sales representatives, distributors, original equipment manufacturers, and direct sales, as well as through its website. The company was formerly known as Tofle America, Inc. and changed its name to Omega Flex, Inc. in 1996. Omega Flex, Inc. was incorporated in 1975 and is based in Exton, Pennsylvania.

Park-Ohio Holdings Corp. provides supply chain management outsourcing services, capital equipment, and manufactured components in the United States, Europe, Asia, Mexico, Canada, and internationally. It operates through three segments: Supply Technologies, Assembly Components, and Engineered Products. The Supply Technologies segment offers Total Supply Management solution, including engineering and design support, part usage and cost analysis, supplier selection, quality assurance, bar coding, product packaging and tracking, just-in-time and point-of-use delivery, electronic billing, and ongoing technical support services, as well as provides spare parts and aftermarket products; and production components, such as valves, fuel hose assemblies, electro-mechanical hardware, labels, fittings, steering components, and other products. It also engineers and manufactures precision cold-formed and cold-extruded fasteners and other products, including locknuts, SPAC nuts, SPAC bolts, and wheel hardware. The Assembly Components segment manufactures aluminum products, direct fuel injection fuel rails and pipes, fuel filler pipes, and flexible multi-layer plastic and rubber assemblies; turbo charging and coolant hoses; and fluid handling systems. It also offers machining services, as well as value-added services, such as design engineering, machining, and part assembly. The Engineered Products segment designs and manufactures engineered products, including induction heating and melting systems, pipe threading systems, and forged and machined products primarily for ferrous and non-ferrous metals, silicon, coatings, forging, foundry, automotive, and construction equipment industries; engineers and installs mechanical forging presses; sells spare parts; provides field services; and offers aerospace and defense structural components, and rail products, such as railcar center plates and draft lugs. Park-Ohio Holdings Corp. was founded in 1907 and is headquartered in Cleveland, Ohio.

Luxfer Holdings PLC, together with its subsidiaries, designs, manufactures, and supplies high-performance materials, components, and high-pressure gas containment devices for defense and emergency response, healthcare, transportation, and general industrial end-market applications. It operates in two segments, Elektron and Gas Cylinders. The Elektron segment focuses on specialty materials based on magnesium and zirconium. It provides magnesium alloys for use in variety of industries; magnesium powders for use in countermeasure flares, as well as heater meals; photoengraving plates for graphic arts; and zirconium-based materials and oxides used as catalysts and in the manufacture of advanced ceramics, fiber-optic fuel cells, and other performance products. The Gas Cylinders segment manufactures and markets specialized products using carbon composites and aluminum, including pressurized cylinders for use in various applications comprising self-contained breathing apparatus (SCBA) for firefighters, containment of oxygen, and other medical gases for healthcare, alternative fuel vehicles, and general industrial. Luxfer Holdings PLC has operations in the United States, the United Kingdom, Germany, Italy, France, rest of Europe, the Asia Pacific, and internationally. The company was founded in 1898 and is based in Manchester, the United Kingdom.

China Yuchai International Limited, through its subsidiaries, manufactures, assembles, and sells diesel and natural gas engines for trucks, buses and passenger vehicles, marine, industrial, and agriculture applications in the People's Republic of China and internationally. It operates through two segments, Yuchai and HLGE. The company provides diesel engines comprising 4- and 6-cylinder diesel engines, high horsepower marine diesel engines, and power generator engines, as well as natural gas engines, diesel power generators, diesel engine parts, and remanufacturing services; and generator sets, as well as plug in hybrid engines, range extenders, power generation powertrains, hybrid powertrains, integrated electric drive axel powertrains, and fuel cell systems. It also engages in the hospitality and property development activities. In addition, the company designs, produces, and sells exhaust emission control systems. It distributes its engines directly to auto original equipment manufacturers, agents, and retailers, as well as provides maintenance and retrofitting services. The company was founded in 1951 and is based in Singapore.

Twin Disc, Incorporated designs, manufactures, and sells marine and heavy duty off-highway power transmission equipment worldwide. It operates through two segments, Manufacturing and Distribution. The company's products include marine transmissions, azimuth drives, surface drives, propellers, and boat management systems, as well as power-shift transmissions, hydraulic torque converters, power take-offs, industrial clutches, and controls systems. It also provides non-twin disc manufactured products. The company sells its products through a direct sales force and distributor network to customers primarily in the pleasure craft, commercial, and military marine markets, as well as in the energy and natural resources, government, and industrial markets. Twin Disc, Incorporated was founded in 1918 and is headquartered in Racine, Wisconsin.

Babcock & Wilcox Enterprises, Inc., together with its subsidiaries, provides energy and emissions control solutions to a range of industrial, electrical utility, municipal, and other customers worldwide. It operates through three segments: Babcock & Wilcox Renewable; Babcock & Wilcox Environmental; and Babcock & Wilcox Thermal. The Babcock & Wilcox Renewable segment offers technologies for waste-to-energy, solar construction and installation, and biomass energy systems, as well as black liquor systems for the pulp and paper industry. This segment provides technologies support solutions for diverting waste from landfills to use for power generation and replacing fossil fuels while recovering metals and reducing emissions. The Babcock & Wilcox Environmental segment offers a range of emissions control and environmental technology solutions for utility, waste to energy, biomass, carbon black, and industrial steam generation applications. This segment provides systems for cooling, ash handling, particulate control, nitrogen oxides and sulfur dioxides removal, chemical looping for carbon control, and mercury control. The Babcock & Wilcox Thermal segment offers steam generation equipment; aftermarket parts; and construction, maintenance, and field services for plants in the power generation, oil and gas, and industrial sectors. This segment has an installed equipment for utilities and general industrial applications, including refining, petrochemical, food processing, metals, and others. The company was founded in 1867 and is headquartered in Akron, Ohio.

Taylor Devices, Inc. engages in design, development, manufacture, and marketing of shock absorption, rate control, and energy storage devices for use in machinery, equipment, and structures in North America, Asia, and internationally. Its products include seismic dampers that are designed to mitigate the effects of earthquakes on structures; Fluidicshoks, which are compact shock absorbers primarily used in defense, aerospace, and commercial industries; and crane and industrial buffers, which are larger versions of the Fluidicshoks for industrial application on cranes and crane trolleys, truck docks, ladle and ingot cars, ore trolleys, and car stops. The company's products also comprise self-adjusting shock absorbers that include versions of Fluidicshoks, and crane and industrial buffers, which automatically adjust to various impact conditions and are designed for high cycle application primarily in the heavy industry; liquid die springs that are used as component parts of machinery and equipment used in the manufacture of tools and dies; vibration dampers, which are primarily used by aerospace and defense industries to control the response of electronics and optical systems subjected to air, ship, or spacecraft vibration; machined springs used in the aerospace applications; and custom actuators for special aerospace and defense applications. It markets its products through a network of sales representatives and distributors. The company was incorporated in 1955 and is headquartered in North Tonawanda, New York.

None

Hurco Companies, Inc., an industrial technology company, designs, manufactures, and sells computerized machine tools to companies in the metal cutting industry worldwide. The company's principal products include general-purpose computerized machine tools, including vertical and horizontal machining centers, turning centers, and toolroom machines. It also provides computer control systems and related software for press brake applications. In addition, the company offers machine tool components, automation integration equipment, and solutions for job shops; and software options, control upgrades, and accessories and replacement parts for its products, as well as customer service, training, and applications support services. It serves independent job shops and specialized short-run production applications within large manufacturing operations, as well as precision tool, die, and mold manufacturers in aerospace, defense, medical equipment, energy, automotive/transportation, electronics, and computer industries. The company sells its products under the Hurco, Milltronics, and Takumi brands through independent agents and distributors, as well as through its direct sales and service organizations. Hurco Companies, Inc. was incorporated in 1968 and is headquartered in Indianapolis, Indiana.

Richtech Robotics Inc. develops, manufactures, deploys, and sells robotic solutions for automation in the service industry. The company offers indoor transport and delivery, sanitation, and food and beverage automation solutions, such as ADAM and ARM worker robots; delivery robots, including Matradee, Matradee X, Matradee L, Richie, and Robbie; and cleaning robots comprising DUST-E SX, and DUST-E MX, as well as accessories, such as bus tubs, cup holders, magnetic tray cases, smartwatches, table location systems, and tray covers. It primarily serves restaurants, hotels, casinos, senior living centers, factories, and retail centers, as well as hospitals, and movie theaters. The company was formerly known as Richtech Creative Displays LLC and changed its name to Richtech Robotics Inc. on June 22, 2022. Richtech Robotics Inc. was incorporated in 2016 and is headquartered in Las Vegas, Nevada.

Laser Photonics Corporation provides integrated laser-blasting solutions for corrosion control, rust removal, de-coating, pre-welding, post-welding, laser cleaning, and surface conditioning in the Americas, Europe, Asia, the Middle East, and North Africa. It offers laser cleaning systems, such as CleanTech Titan FX for cleaning, rust removal, and surface conditioning; CleanTech Titan Express, a high-power fiber laser for cleaning and surface conditioning; CleanTech MegaCenter, an industrial-grade laser parts cleaning, rust removal, and surface conditioning system; CleanTech Handheld LPC-50CTH and CleanTech Handheld LPC-100CTH, an air-cooled pulsed laser systems; CleanTech Handheld LPC-200CTH, a manual handheld laser surface cleaning model; CleanTech Handheld LPC-300CTH, a water-cooled laser system; CleanTech Handheld LPC-1000CTH, a laser cleaning tool; CleanTech Handheld 2000-CTH Jobsite for industrial cleaning, rust and paint removal, and surface preparation; CleanTech Handheld NCX, a portable laser surface cleaning and conditioning system; CleanTech Robot, a robotic laser cleaning system, CleanTech Laser Blaster Cabinet, a laser cleaning machine; and CleanTech EZ- Rider, a laser cleaning tool. The company also provides laser cutting machines; laser engraving machines; laser marking machines; 3D metal printers; laser glass scribing systems; ITO removal systems; glass cutting lasers; glass wafer dicing products; laser glass marking; microscope slide and covers laser cutting systems; precision glass scribers; semiconductor laser systems; OEM laser marking and engraving parts; fiber lasers; scanning and cutting heads; mobile handheld laser HD cart; mobile rugged cases; enclosures; fume extractors; process tables; rotary indexers; water chiller machines; X-Y tables; USB controllers; and custom lasers. It serves the aerospace, automotive, defense, nuclear, shipbuilding, and space sectors. Laser Photonics Corporation was incorporated in 2019 and is based in Orlando, Florida.

TPI Composites, Inc. manufactures and sells composite wind blades, and related precision molding and assembly systems to original equipment manufacturers (OEMs). The company also provides composite solutions for the transportation industry; and field service inspection and repair services to OEM customers and wind farm owners and operators. It operates in the United States, Asia, Mexico, Europe, the Middle East, Africa, and India. The company was formerly known as LCSI Holding, Inc. and changed its name to TPI Composites, Inc. in 2008. TPI Composites, Inc. was founded in 1968 and is headquartered in Scottsdale, Arizona.

Broadwind, Inc. manufactures and sells structures, equipment, and components for clean tech and other specialized applications primarily in the United States. It operates through three segments: Heavy Fabrications, Gearing, and Industrial Solutions. The Heavy Fabrications segment provides fabrications to various industrial markets. It offers steel towers and adapters primarily to wind turbine manufacturers. The Gearing segment provides gearing, and gearboxes and systems for onshore and offshore oil and gas fracking and drilling, surface and underground mining, wind energy, steel, material handling, and other infrastructure markets. This segment also offers heat treat services for aftermarket and original equipment manufacturer applications. The Industrial Solutions segment provides supply chain solutions for offering instrumentation and controls, valve assemblies, sensor devices, fuel system components, electrical junction boxes and wiring, energy storage services, and electromechanical devices; light fabrication, inventory management, and kitting and assembly services; packaging solutions; and fabricating services for panels and sub-assemblies to combined cycle natural gas turbine market. The company sells its products to the energy, mining, and infrastructure sector customers through its direct sales force and independent sales agents. The company was formerly known as Broadwind Energy, Inc. and changed its name to Broadwind, Inc. in May 2020. Broadwind, Inc. is headquartered in Cicero, Illinois.

Greenland Technologies Holding Corporation develops, manufactures, and sells drivetrain systems for material handling machineries and electric vehicles, and electric industrial vehicles. The company offers transmission products for forklift trucks that are used in manufacturing and logistic applications, such as factories, workshops, warehouses, fulfillment centers, shipyards, and seaports. It also develops robotic cargo carriers. The company was founded in 2006 and is based in East Windsor, New Jersey.

CVD Equipment Corporation, together with its subsidiaries, designs, develops, manufactures, and sells process equipment and solutions that are used to develop and manufacture materials and coatings for research and industrial applications in the United States. It operates through three segments: CVD, SDC, and CVD Materials. The company offers chemical vapor deposition systems for use in the research, development, and manufacture of aerospace, medical components, semiconductors, LEDs, carbon nanotubes, nanowires, solar cells, and other industrial applications; and rapid thermal processing systems for use in implant activation, oxidation, silicide formation, and other processes. It also provides annealing, diffusion, and low pressure chemical vapor deposition furnaces for use in diffusion, oxidation, implant anneal, solder reflow, solar cell manufacturing, and other processes; and gas and liquid control systems, such as gas cylinder storage cabinets, custom gas and chemical delivery systems, gas and liquid valve manifold boxes, and gas isolation boxes for semiconductor fabrication processes, solar cells, LEDs, carbon nanotubes, nanowires, and industrial applications. In addition, the company offers standard and custom fabricated quartz-ware used in its equipment and other customer tools, as well as repair and replacement services for existing quartz-ware. Further, it provides MesoPlasma direct write printing, a materials deposition process that provides instrumentation, fine feature patterns, and coatings onto conformal components; and Tantaline corrosion resistant coating for valves, fittings, fasteners, vessels, bellows, and custom designed items, as well as offers carbon composites and electronic materials. The company sells its products primarily to aerospace/defense, medical, electronic component manufacturers, universities, and government and industrial laboratories. The company was incorporated in 1982 and is headquartered in Central Islip, New York.

JE Cleantech Holdings Limited, an investment holding company, designs, develops, manufactures, and sells cleaning systems for various industrial end-use applications in Singapore, Malaysia, and internationally. It provides various cleaning systems and other equipment, including aqueous washing systems, plating and cleaning systems, train cleaning systems, and filtration units. The company also offers centralized dishwashing services for food and beverage establishments, such as food courts, hawker centers, cookhouses, eldercare homes, and hospitals, as well as general cleaning services for food courts. In addition, it leases dishware washing equipment. The company was founded in 1999 and is headquartered in Singapore. JE Cleantech Holdings Limited is a subsidiary of JE Cleantech Global Limited.

Nature's Miracle Holding Inc., an agriculture technology company, provides equipment and services to growers in the controlled environment agriculture industry in North America. The company provides grow lights and other hydroponic products; and develops a pipeline to build commercial-scale greenhouse for fresh and local vegetable products. It also designs, builds, and operates various indoor growing settings, including greenhouse and indoor-growing spaces. Nature's Miracle Holding Inc. is based in Upland, California.